Differential Oscilloscope Probes
Oscilloscope Probe and Surface Mount Clips Home | Passive Oscilloscope Probes | Differential Oscilloscope Probes | Surface Mount Clips (Nano Clips)
Applications | Tech Tips | FAQs | Check inventory status at 
FUNCTION |
ADF25 |
ADF25A |
ADF25C |
|---|---|---|---|
| Bandwidth |
DC -25 MHz (-3dB) |
DC -25 MHz (-3dB) |
DC -70 MHz (-3dB) |
| Accuracy |
± 2% |
± 2% |
± 2% |
| Risetime |
14nS |
14nS |
14nS |
| CMRR (Typical) @ 50Hz |
-80dB |
-86dB |
-80dB |
| CMRR (Typical) @ 20kHz |
-60dB |
-66dB |
-60dB |
| CMRR (Typical) @ 200kHz |
-50dB |
-56dB |
-50dB |
| Input Impedance |
4M/10pf each side to ground 8M/5pF between inputs |
4M/10pf each side to ground 8M/5pF between inputs |
10M/10pf each side to ground 20M/5pF between inputs |
| Input Voltage |
±140V DC Inc.Pk AC @ 20:1 or 100V RMS |
±170V DC Inc.Pk AC @ 10:1 or 50V RMS |
±700V DC Inc.Pk AC @ 100:1 or 400V RMS |
| Maximum Differential |
± 1,400VDC Inc. Pk AC 200:1 or 1,000V RMS |
± 1,400VDC Inc. Pk AC 100:1 or 500V RMS |
± 7,000VDC Inc. Pk AC 1,000:1 or 5,000V RMS |
| Output Voltage |
± 7V minimum 2KΩ load |
± 7V minimum 2KΩ load |
± 7V minimum 50KΩ load |
| Offset (typical) |
<± 5mV -10° C to + 40° C |
||
| Common Mode |
± 1,400V DC Inc. Pk AC or 1,000V RMS |
± 1,400V DC Inc. Pk AC or 1,000V RMS |
± 7,000V DC Inc. Pk AC or 2,500V RMS |
| Noise (typical) |
0.7mV RMS |
0.7mV RMS |
0.9mV RMS |
| Output Source Impedance |
1Ω @ 1kHz. 8Ω @1 MHz |
1Ω @ 1kHz. 8Ω @1 MHz |
50Ω |
| Operating Temperature |
-10° C to + 40° C (14°F to 104°F) |
||
| Power Requirements |
4 AA cell or 6V main adapters: DC/600mA or DC/800mA |
||
| Power Supply |
Not included |
||
| Input Leads |
45 cm double insulated PVC terminated in 44 mm safety plugs |
45 cm double insulated PVC terminated in 44 mm safety plugs |
60 cm double insulated Rubber terminated in sprung hooks |
| IEC1010 |
CAT III |
CATIII |
CATII |